A Full Line Gasket & O-Ring Distributor

The Answer is Always Flexitallic

24/7 EMERGENCY CALLOUT SERVICE - CALL 832-445-0000

EMAIL OUR SALES DEPARTMENT

FAQ Categories: Spiral Wound Gaskets

Style 625

DOWNLOAD DATA SHEET Style 625 spiral wound gaskets are similar to Style R spiral wound gaskets, except original thickness is 0.0625″. These gaskets are widely used wherever space restrictions indicate the need for a wafer thin gasket design capable of sealing high pressures. Style 625 spiral wound gaskets embody all of the exclusive features for […]

Style CG-RJ & CGI-RJ

DOWNLOAD DATA SHEET CG-RJ and CGI-RJ spiral wound gaskets are designed for use as a replacement maintenance item of standard oval and octagonal ring joint gaskets. These gaskets are: Available for NPS 1/2″ to 24″ and pressure classes 150 to 1500. Gasket thickness is 0.175″ (4.5mm) and the outer ring thickness is 0.125″ (3.2mm). Style […]

Style T

DOWNLOAD DATA SHEET Style T spiral wound gaskets are used for boiler handhole and tube cap assemblies. They are available in round, oval, obround, square, pear and diamond shapes. Please note Style T gaskets rely on internal pressure in the boiler to properly seat the gasket. This means, when a hydrostatic test is performed on […]

Style R & RIR

DOWNLOAD DATA SHEET Style R spiral wound gaskets embody all the exclusive features for keeping compression values in balance with bolting and providing adequate resilience to compensate for variable stresses encountered in service. Style R spiral wound gaskets are manufactured to a nominal thickness of 0.125″ (3.2mm). Optimum compression is in the range of 0.090″ […]

Style M, MC & MCS

DOWNLOAD DATA SHEET The Style M spiral wound gasket is designed for boiler manhole cover assemblies. They are usually round, obround or oval shape, depending of course, upon the manhole plate configuration. Style MC spiral wound gaskets have pre-formed inner and/or outer rings made of spiral windings. This centering guide permits the gasket to assume […]

Style LS & LSI

DOWNLOAD DATA SHEET Style LS spiral wound gaskets have been engineered to provide an alternative to sheet gaskets in Class 150 and Class 300 service. The traditional spiral wound gasket has its steel windings protruding above the compression stop. (See Traditional vs. “LSI” and “LS” at the bottom left.) This requires a significant loading stress […]

Style CGI

DOWNLOAD DATA SHEET Style CGI spiral wound gaskets are a Style CG gasket fitted with an internal ring which gives an additional compression limiting stop and provides a heat and corrosion barrier protecting gasket windings and preventing flange erosion. It is customary to select inner ring material to be the same as the metal winding. *Note […]

Style CG

DOWNLOAD DATA SHEET Style CG spiral wound gaskets utilize an external ring which accurately centers the gasket on the flange face, provides additional radial strength to prevent gasket blowout and acts as a compression stop. Gaskets for standard flanges are 0.175″ (4.5mm) thick, fitted with 0.125″ (3.2mm) thick solid metal rings. Unless otherwise stated. Style […]

Flexseal Industrial © 2016