A Full Line Gasket & O-Ring Distributor

The Answer is Always Flexitallic

24/7 EMERGENCY CALLOUT SERVICE - CALL 832-445-0000

EMAIL OUR SALES DEPARTMENT

Solid Corrugated Metal Gaskets

As the name suggests, the solid corrugated metal gasket is comprised solely of metal and does not contain any non-metallic fillers in its construction. The temperature limitation of the gasket is only affected by the metal selected.

Style 100, a Corrugated Metal Gasket, has corrugations that provide multi-seals across the face of the gasket. Pitch of of the corrugations can be 1/8″, 3/16″ or 1/4″. Three concentric corrugations on each side of the gasket are suggested. Where practical a flat area should be left on each side of the corrugations.

 

Style 102, a Single-Jacketed Gasket, is a Corrugated Metal Gasket enclosed in a flat metal jacket that covers the inside and outside diameters of the gasket and the contact surface on one side.

Typically used for high temperature applications and applications involving steam, water, gas, oil etc. up to 1000 psi in the case of Style 129 and 102, and up to 500 psi in the case of Style 100.

Was this answer helpful ? Yes / No
Flexseal Industrial © 2016